The microcomputer controlled electronic universal testing machine is mainly used for testing mechanical performance indicators such as tension, compression, bending, shear, peeling, and tearing of various metal, non-metal, and composite materials. The system adopts microcomputer closed-loop control, which has a wide and accurate loading speed and force measurement range, and has high accuracy and sensitivity in measuring and controlling loads and displacements. This equipment is suitable for manufacturing industries such as metals, adhesives, pipes, profiles, aerospace, petrochemicals, waterproofing membranes, wires and cables, textiles, fibers, rubber, ceramics, food, pharmaceutical packaging, geotextiles, films, wood, paper, as well as product quality supervision departments at all levels. It is also suitable for teaching demonstrations in colleges and universities.
The design of the testing machine host has the characteristics of beautiful appearance, easy operation, stable and reliable performance, no pollution, low noise, and high efficiency. The design of the auxiliary equipment is matched with the host, with a wedge-shaped translational structure and manual rotation clamping, and the sample is not subjected to additional force. Convenient, reliable, and non slip clamping.
Main technical indicators:
1. Maximum load of 100kN;
2. Testing machine accuracy: Level 0.5;
3. Test force measurement range: 0.4% -100% FS;
4. Test force grading: no grading throughout the entire process;
5. The relative error (accuracy) of the test force indication is less than ± 0.5%;
6. Coaxiality<15%
7. Displacement resolution ≤ 0.025 μ m
8. Accuracy of displacement measurement: ± 1%;
9. Deformation measurement range: 0.2-100% FS;
10. Relative error of deformation indication: within ± 0.5%;
11. Deformation resolution: 0.001mm;
12. Range of force control rate adjustment: 0.005-5% FS/S;
13. Relative error of force control rate: within ± 0.5% of the set value;
14. Deformation rate adjustment range: 0.005-5% FS/S;
15. Relative error of deformation control rate: When the rate is less than 0.05% FS, it is within ± 2% of the set value; When the rate is ≥ 0.05% FS, it is within ± 0.5% of the set value;
16. Measurement range of beam speed: 0.001-500mm/min;
17. Relative error of crossbeam speed: within ± 1.0% of the set value when the speed is less than 0.01 mm/min; When the speed is ≥ 0.01 mm/min, within ± 0.2% of the set value;
18. Constant force, constant deformation, and constant displacement control range: 0.5% to 100% FS;
19. Equipment weight: 500kg.
CH
EN
