1. This testing machine is mainly used to test the compressive and flexural strength test of cement, mortar, concrete, aerated concrete, gypsum, granulated sand, etc., and fully meets the requirements of the national standard "GB/T17671-2021 Cement Cement Sand Strength Testing Method". The accuracy of the equipment is 0.5 level.
2. The testing machine adopts a double column frame structure, the upper pressure plate is installed on the upper fixed beam, the lower pressure plate loads the specimen upwards under the action of the driving screw, and the AC servo control and transmission system are installed in the lower part of the main machine. The testing machine adopts Taiwan TECO AC servo speed regulation system, controls the high-precision and high-frequency response AC servo motor, and drives the precision ball wire pair for testing, which can realize a wide range of adjustment of the test speed (0.01-50mm/min), and the test process is smooth and efficient.
3. The use of liquid crystal display controller to conduct tests according to national standards, independently complete the setting of test parameters, control of the test process, data collection, processing, analysis and display in the test process, which can not only realize the test of single specimens, but also carry out group tests, and control and measurement are precise, accurate, fast, convenient and reliable.
4. According to the customer's requirements, the test data can be statistically calculated and processed, and then output and print the test curves and test reports of various requirements, which can realize the storage, printing and networking functions, intelligent and flexible.
5. It has the function of returning to the initial position after the test, which is efficient and fast.
6. It has the limit protection function of the working position and the function of overload and overcurrent protection, which is reliable and safe.
CH
EN
