The DLB-5MN microcomputer controlled stacked force standard machine is used for measuring and testing standard force measuring instruments, weighing sensors, and load sensors. Fully comply with the requirements of JJG1116-2015 "Stacked Force Standard Machine", JJG669-2003 "Calibration Regulations for Weighing Sensors", and JJG144-2007 "Calibration Regulations for Standard Force Measuring Instruments". This machine is suitable for force transmission units such as metrology institutes, aviation metrology, aerospace metrology, national defense metrology, and sensor manufacturing enterprises.
Main technical parameters:
1. Test force: 5MN
2. Test force measurement range: 2% -100% F.S.
3. Force value error (in and out): within the range of 2% -10% F.S, the test data is better than ± 0.1%; Within the range of 10% -100% F.S, the experimental data is better than ± 0.03%.
4. Repeatability of force values: within the range of 2% -10% F.S, the experimental data is better than 0.1%; Within the range of 10% -100% F.S; The experimental data is better than 0.03%.
5. Initial load discrimination ability: better than 0.02% at 10% FS.
6. Load fluctuation: within the range of 2% -10% F.S, the test data is better than 0.01%; The experimental data within the range of 10% -100% F.S is better than 0.003%.
7. Directional error: within the range of 2% -10% F.S, the experimental data is better than 0.1%; Within the range of 10% -100% F.S, the experimental data is better than 0.06%.
CH
EN
