The fully automatic pull-out machine is an automated equipment specifically designed to test the bonding strength or tensile bearing capacity between building exterior wall insulation systems (such as EPS/XPS insulation boards, rock wool, phenolic boards, etc.) and base walls. The test results directly affect the quality and safety of building energy-saving projects.
1、 Characteristics
1. Integrated design, lightweight and portable.
2. Embedded measurement display circuit, real-time display of measurement data, easy to use.
3. Touch screen control, friendly interpersonal operation interface.
4. Automatic testing and breakage type judgment, convenient to use.
5. Peak holding function for easy data recording.
6. Multi point force correction for more accurate data.
7. Powered by lithium batteries, convenient for outdoor use.
2、 Compliant with standards
1. JGJ144-2019 "Technical Standard for External Wall Insulation Engineering"
JG158-2013 "Rubber Powder Polystyrene Particle External Wall Insulation System"
JG149-2015 "Expanded Polystyrene Board Thin Plastered External Wall Insulation System"
JGJ110-2017 "Inspection Standard for Bonding Strength of Decorative Bricks in Building Engineering"
JGJ126-2015 "Code for Construction and Acceptance of Exterior Wall Decorative Brick Engineering"
3、 Technical parameters
1. Pulling force: 10kN
2. Effective detection range: 1% -100% FS
3. Tensile stroke: 50mm
4. Pulling speed: 0.5mm/min -50mm/min
5. Accuracy level: 0.5% F.S
6. Sensor: High precision external S-type sensor
7. Drive mode: stepper motor drive
8. Dimensions: 330 * 300 * 160mm
9. Weight: 3.5kg
10. Power supply: 12.8V rechargeable battery
4、 Configuration
1. One integrated fully automatic drawing machine host
2. One charger
3. Pulling block
4. Pulling 2 heads
5. One copy each of the instruction manual, certificate of conformity, and packing list
CH
EN
