The JB-D300W low-temperature impact testing machine is used to test the impact resistance performance of metal materials under dynamic loads. It is an essential testing instrument for
metallurgical machinery manufacturing and other units, as well as an indispensable testing instrument for research institutions conducting new material research.
JB-D300W is a microcomputer screen display fully automatic impact testing machine, which adopts PC microcomputer control, electric swing, impact, microcomputer measurement,
calculation, screen display results and can be printed, etc. It has high work efficiency and testing accuracy. After impacting the sample, the remaining energy can be used to automatically
swing and prepare for the next test. The operation is simple and the work efficiency is high. Its superiority can be better demonstrated in laboratories that conduct continuous impact tests
and in industries such as metallurgy and mechanical manufacturing that conduct a large number of impact tests. The PC can display the material's impact absorption energy, impact
toughness, pendulum swing angle, and test average value, and can print the test data and average value for the current test. The JB-D300W low-temperature impact testing machine adopts
a cascade compressor refrigeration technology, utilizing the principle of thermal balance and cyclic stirring to achieve automatic and uniform cooling, constant temperature, and
temperature adjustment of the sample, all of which are electrically controlled. It is equipped with a dedicated sample feeding device for automatic feeding and automatic positioning of the
sample, ensuring that the impact time from the sample being taken out of the furnace to the impact is not more than 2 seconds, meeting the requirements of the metal low-temperature
Charpy impact testing method. This testing machine complies with the national standard GB/T3808-2018 "Inspection of Pendulum Impact Testing Machines", conducts impact testing on metal
materials according to the national standard GB/T229-2020 "Charpy Pendulum Impact Testing Method for Metal Materials", and complies with JJG145-82 "Verification Regulations for Pendulum
Impact Testing Machines".
Main technical indicators:
1. Impact energy: 150J, 300J
2. Pre swing angle of pendulum: 150 °
3. Distance from the center of the pendulum axis to the impact point: 750mm
4. Impact speed: 5.2m/s
5. Sample support span: 40mm
6. Jaw corner: R1-1.5mm
7. Impact blade fillet: R2-2.5mm
8. Thickness of impact knife: 16mm
9. Refrigeration method: liquid nitrogen refrigeration
10. Sample box capacity: 20 pieces
11. Low temperature range: 0-100 ° C
12. Temperature control accuracy: fluctuation ± 1.5 ° C, gradient 2 ° C
13. Sample size: 10 × 10 × 55mm
14. Dimensions: 1500mm × 850mm × 1340mm
15. Net weight of testing machine: 850kg
16. Power supply: AC three-phase 380V ± 10% 50Hz 5A
17. Environmental conditions: No corrosive media, no vibration, no strong electromagnetic field around
CH
EN
