Ceramsite sand

The test machine adopts a double column frame structure. The upper pressure plate is installed on the upper fixed beam, the lower pressure plate is loaded upward under the action of the driving lead screw, and the AC servo control and transmission system are installed at the lower part of the main machine. The test machine adopts the imported AC servo speed regulation system to control the high-precision and high-frequency AC servo motor and drive the precision ball screw to carry out the test. The test speed can be adjusted in a large range (0.01-50mm / min), and the test process is stable and efficient.

1、 Main technical indicators:

1. Compressive Z test force: 300 kn;

2. Measurement range and test accuracy of compressive test force: 6-300 kn;

3. Adjustable range of compressive test force speed: 1-10 kn / S (accuracy higher than ± 5%);

4. Test speed control range: 0.01-50mm/min

5. Test execution standard: national standard or enterprise standard

6. Z distance between upper and lower pressure plates: 250mm

7. Size of upper and lower pressure plates: Φ 100mm.

9. Compression test method: single piece test; Each group of 6 tests can be completed continuously

10. Host size (L x W x H): about 830x530x1450mm

11. Weight: 500kg

12. Power: 220V, 50Hz;