Seismic support and hanger

1、 Equipment Overview:

The anti-seismic support and hanger cyclic loading test machine scheme is a special equipment for testing the load performance of the anti-seismic support facilities of the building electromechanical equipment with the seismic force as the main load and the building seismic intensity of 6-9 degrees.

2、 Specification and model:

Waw-zdjpl seismic support and hanger cyclic loading test machine

3、 Applicable standards:

CJ / t476-2015 general technical conditions for seismic supports and hangers of building electromechanical equipment

GB / t37267-2018 general technical conditions for seismic supports and hangers of buildings

4、 Test items:

① Component load performance ② component load performance ③ cyclic load performance

5、 Technical indicators:

1. Power supply: 6kW, 380V;

2. Control mode: computer control;

3. Display mode: computer display;

4. Setting mode: computer program setting;

5. Seismic cyclic loading frequency of components: 0.1Hz;

6. Seismic cyclic loading force of components: 0-40kn;

7. Capacity of component anti-seismic cyclic load sensor: 50kN;

8. Resolution of component anti-seismic cyclic load sensor: 2n;

9. Component fatigue test sine wave: amplitude 20.4kg, frequency 3Hz;

10. Measurable vertical length of supports and hangers: 500mm-1000mm;

11. Installation quantity of test pieces: one on the left and one on the right symmetrically according to the loading force center;

12. Floor area of equipment: About × wide × Height = 4000mm × 3000mm × 2200mm