The YAW-2000D microcomputer-controlled constant stress testing machine (hereinafter referred to as the testing machine) is primarily used for compression tests on specimens of metals and non-metals, such as concrete, cement, masonry, and other materials. It is suitable for use in engineering and construction units involved in architecture, building materials, roads, bridges, mining, and other fields.
Normal operating conditions of equipment
1. Within the temperature range of 10℃ to 35℃, the relative humidity should not exceed 80%;
2. In a vibration-free environment, there is no corrosive medium or electromagnetic field interference around;
3. The fluctuation range of the power supply voltage should not exceed ±10% of the rated voltage;
4. The host machine must be reliably grounded and firmly fixed on the foundation;
Maintenance and Care
1. During the test, attention should be paid to the position of the moving crossbeam to ensure a suitable testing space;
2. The lead screw should be lubricated monthly, and the condition of the lubricating oil in the reducer should be checked frequently;
3. Please ensure the testing equipment is kept clean, and the site is cleaned up after the test is completed;
4. If any abnormalities occur during equipment operation, immediately press the emergency stop button.
CH
EN
