Friction loss testing machine is an experimental equipment used to evaluate the wear performance and friction coefficient of materials during the friction process, widely used in materials science, mechanical engineering, petrochemical industry and other fields.
Test and experiment control software:
It can achieve force closed-loop, displacement closed-loop, and open-loop control outputs, controlled by tension and compression methods;
It can control various types of tests such as tension, compression, compression, torsion, compact tension, constant stress, and constant strain;
Theoretically supporting experimental control for any number of cycles of testing;
Support the collection of various control waveform outputs including sine wave, cosine wave, square wave, triangular wave, sawtooth wave, etc., with a frequency range between 0.01-10HZ;
Simultaneously record force time, displacement time, and deformation time test curves, which can be switched and displayed at any time. The horizontal and vertical coordinates are matched, allowing for arbitrary scaling up and down, as well as horizontal or vertical movement;
The software can be set to collect data at a high speed of 1000 points per second and a low speed of 50 points per second;
Display the force value, displacement value, dynamic load value, static load value, as well as the upper and lower peak values, frequency, cycle times, test time, etc. of the control waveform in a non graded manner. The display resolution is automatically adjusted according to the indicated values;
Automatically save test data, and the recording frequency can be set by the user based on time or frequency;
Capable of outputting and printing reports in EXCEL format;
Protect the control output through various methods such as upper and lower limit, dynamic control limit, and swing limit.
CH
EN
