The seismic support hanger cyclic loading test machine scheme is a specialized equipment for load performance testing of building electromechanical equipment seismic support facilities with seismic force as the main load and building seismic intensity ranging from 6 to 9 degrees.
Technical Indicators:
1. Power supply: 6kW, 380V;
2. Control method: computer-controlled;
3. Display mode: computer monitor;
4. Setting method: Computer program setting;
5. Component seismic cyclic loading frequency: 0.1Hz;
6. Component seismic cyclic loading force value: 0-40kN;
7. Component seismic cyclic loading sensor capacity: 50kN;
8. Component seismic cyclic loading sensor resolution: 2N;
9. Component fatigue test sine wave: amplitude 20.4kg, frequency 3Hz;
10. Measurable vertical length of supports and hangers: 500mm-1000mm;
11. Installation quantity of test specimens: one symmetrical on each side according to the center of loading force;
12. The equipment occupies an area of approximately: length x width x height=4000mm x 3000mm x 2200mm.
CH
EN
